String Art Earrings with Photo Tutorial

I saw some beautiful earrings the other day and was inspired to try to make my own version.  Here are the materials you need:

 

Wire hoops

Small beads in the color(s) of your choice

Embroidery floss in the color(s) of your choice

Fish hook earring wires

Round nose pliers

Glue that dries clear

First, place the beads on the wire hoops until it is almost full.  Leave enough room to close the hoop.

Close the hoop.

Next, tie on 1-3 strands of embroidery floss.  One strand will give you a light, airy look and three strands will give you more fill.  Use 1 or 2 strands if you are going to add another color.

To make a closed circle, wrap the floss in the following pattern:

You should choose a bead that is directly across (or almost directly across) from your beginning point for your #2 wrap.  When you come to the top of the circle, you will move one bead to the right, and at the bottom, you will move one bead to the left.  Treat the closed loops at the top as if it were a bead.  Continue wrapping until you finish where you started:

Tie off and add a drop of glue to the knots.  When the glue is dry, add the earring wire and enjoy.

To make an open circle or tear drop shape the loop is started the same way.  The difference is, you choose your #2 wrap to be on the side of the loop instead of across from the starting point:

Continue wrapping until you first touch the hoop closure. This will give you a tear drop shape:

If you want an open circle, continue wrapping until you reach your #2 bead again.  Bring it back to the closure and tie off.

Finish in the same manner.  Different colors of embroidery floss can be held together as in the tear drop blue earrings, or they can be layered as in the black and white earrings.  Hope you enjoy!

Make a Top a “Little” Bigger

I recently purchased this top at a thrift store:

I saw it and loved it.  The store had two, in different sizes.  I tried on the smaller one and it was just a little too small.  So, I bought the other one.  I got it home and found out it was the same size as the one I tried on.  I was really disappointed.  Then I started looking at it and got an idea.  I could make it just a little bigger by adding a panel in back.  Here is how I did it:

Materials:

One top that is slightly too small

One piece of matching or contrasting fabric

10 metal eyelets

1 length of thin elastic

Sewing machine

Matching thread

Eyelet setter

First I removed the elastic from the sleeves, only because I don’t like elastic around my arms.

Then I removed the stitching from the center back.

I cut a panel of fabric 10 inches wide by the length of the top with seam allowances. First I sewed the panel in, right sides together:

Grey represents wrong side, white is right side.

I did this on both sides.

I then sewed another seam with the fabric wrong sides together.  This seam allowance was slightly wider than my eyelets.

I then placed a line of eyelets, five on each side, evenly spaced down the back of the top:

I laced a ribbon through the eyelets:

I didn’t like the way the ribbon looked.  It was hard to adjust and started to fray.  It also tended to untie.

I replaced it with a thin length of elastic.  The top is much more comfortable.  I can pull it on and off without untying it. 

As you can see, I did not put the eyelets all the way down.  I like the way it flares at the bottom.

I think this would also be cute with a different colored top, maybe with a contrasting piece of fabric and multi-colored eyelets.

Yet Another Window Jewelry Holder

Before

After

Screen Window Jewelry Holder

This is one of two jewelry holders my husband, daughter and I made.  We got the windows from freecycle (freecycle.org).  They had glass in them.  We popped out a piece of trim:

 

Do this from the back of the window.  Be very careful, the glass may break.  Save the trim piece if possible. 

We then sanded and refinished the frame.  You could easily paint it or just leave it antiqued looking.  My husband stapled in a piece of screening from the back and replaced the trim piece.  Basically you are just replacing the glass with screen.  You want a little clearance in the back of the screen to make it easier to hook earrings into it.  We then screwed hooks into the frame on all four sides on the front. 

We put a sturdy picture hanger on the back and hung them up. We left the original latch and hinges, I use them to hang my long necklaces.  I use the top row of hooks for my watches and the bottom row for bracelets.

I love how it looks in the room.  It really helps me to see my jewelry.  I can see all my earrings, bracelets and watches. Nothing gets tangled. Enjoy!

Some other ideas:

http://www.craftbits.com/project/jewelry-organizer-frame

http://www.ehow.com/how_6665998_make-earring-holder-window-screen.html